Bargain Fittings



$5.00 Flat rate shipping to US 50 states

Individual Fittings

We ship to Canada.  canada  click for details.

NEW ITEM
half inc union
1/2" stainless steel  threaded union.  
Use this to make a removable connection in your system.  Handy for hard piped systems where you want to be able to move a component off the rig.
  $6.00 each
 NEW ITEM - STEP BITS
In two sizes.
Both step bits

High speed steel titanium nitride coated bits for drilling aluminum or stainless steel kettles, kegs and plastic.  Buy the bigger one if you want to install a water heater element in your vessel.
Sizes -
3/16" - 7/8" in 1/16" steps.  
1/4 - 1 3/8" in  1/8" steps
$18.99 each
Choose size
NEW ITEM
eyebolt

Stainless Steel eyebot with hex nuts.

Size
replace site glass polycarbonate 20 inches SS compression fitting 1/2" NPT x 3/8" Tubing Silicone tubing sold by the foot
Polycarbonate tubing in 2 sizes
3/8 in OD x 1/4 in ID - 1/16 in thick - 18" long
1/2 in OD x 3/8 in ID - 1/16 in thick - 18" long
Pick Outer Diameter
Stainless steel compression adapter fitting
 
1/4 OD tube x 1/2" NPT (pipe thread)
3/8" OD tube x 1/2" NPT (pipe thread)
1/2" OD Tube x 1/2" NPT (pipe thread)
Select size
Translucent Silicone Tubing

1/2" Inner Diameter X 3/4" Outer Diameter  1/8" Thick.  Great for hot transfer. 10 psi max pressure   -100°F to 500°F temperature range  FDA and  NSF-51 certified
$2.20 Per Foot
Corney keg rebuild kit Flat 1/2" Silicone gasket Silicon O-ring
"Corney" Keg O-Ring Rebuild Kit
Rebuild your corney keg. Comes with large oring for lid, 2 orings for post and 2 double ridged orings for the dip tubes. 

$4.00 each kit
 Half inch gasket.
  Improve the seal on your cooler.  Fits very tight on a 1/2" nipple in the weldless sets.   1/8" Thick Silicone rubber.
$3.00 each
 Replacement o-rings . FDA food grade silicone o-ring up to 400 degree F.  

Just pick the size you need.

Size of oring

 
1/2" 316 SS Threaded Full Port Ball Valve 1/2" Threaded Full Port Ball Valve Stainless Steel 1/2" Threaded Coupler
1/2" Threaded Stainless Steel Full port Ball Valve.  Handle color and style of valve may vary.

$13.00 each
 1/2" Threaded Brass Full port Ball Valve.
Handle color may vary.  

$6.00 each
 
 Stainless Steel Coupling..
Choose your size
Stainless Steel 1/2" Threaded Tee Stainless steel washer 1/2" Threaded Stainless Steel 90
Stainless steel Tee.  
Available in 1/2" Or 3/8"

Pick your size

SS Washer Fits NPT weldless sets
Choose your size - .

SS 90 Degree Available in 1/2" or 3/8"
Choose your Size
1/2" 1/2 inch threaded Stainless Steel Locknut 1/2" Brass Male thread to 1/2" Male barb
1/2" Stainless Steel thread to 1/2" Male barb
Stainless Steel Locknuts.  
Straight threaded with groove for o-ring.
1"  -  Fits Electric water heater element thread.
1/2" - Fits 1/2" weldless fittings and 1/2" nipples  
3/8" - Fits 3/8"  nipples and 3/8" weldless sets.
1/4" - Fits 1/4" NPT threads - thermometers / probes
Choose your size
Brass 1/2" Male Pipe to 1/2" Barb.

$3.50 each
 
316 Stainless Steel 1/2" NPT x 1/2" Hose
Available in male or female
female is out of stock.
choose
cap or plug
 1/2 Stainless Steel Nipple 1.5" long Half inch by quarter inch bushing.
1/2" NPT Plug - Use with a locknut and a 1/2" silicone o-ring to fill a hole in your kettle or to close a welded in coupling.

1/2" NPT Cap - Use to cap off a welded in nipple or close off a pipe on your system.
Choose
Stainless steel pipe nipple.
Available in close (1.125"), 1.5", 2", 2.5" and 3" long
Pick size / length
Stainless steel  NPT (pipe thread) bushing

Available in 1/2 x 1/4 inch (install a 1/4 in NPT thermometer)
3/4 in x 1/2 in NPT - limited quantities on hand.

Choose size




HomeShopContactBrew Howto